网上赌场网址多少

What oil seal is used for rotary oil cylinder

hit count: Updated: 17/05/03 17:02:05 Source: avervenus.com [ close ] share:
    Oil seal is a mechanical element used to seal grease. It isolates the parts in the transmission parts that need to be lubricated from the output parts, so that the lubricant does not leak. What kind of oil seal is generally suitable for the rotary oil cylinder?
    Generally, oil seals are less capable of withstanding pressure. For the oil seal on the rotating oil cylinder, we recommend using seals for holes. There are many forms, and the materials are rubber and plastic. The specific use depends on the temperature, pressure, rotation, speed and other factors of the cylinder.
    However, pay attention to these points when installing the oil seal on the rotary cylinder:
    1. The sharp corners require deburring, dulling or chamfering. If the threads are installed when the seals are installed, they need to be protected to prevent damage to the seals.
    2. Any rust, dirt, debris or foreign particles must be removed.
    3. Do not use tools with sharp corners.
    4. Before installation, apply oil or grease to the cylinder barrel, rotating shaft and seal. If grease is used, its components must not contain solid additives.
    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder