Before disassembling the oil cylinder, the hydraulic circuit must be depressurized. Otherwise, when the oil pipe connector connected to the oil cylinder is loosened, the high-pressure oil in the circuit will quickly eject in response to the pressure. Therefore, the hydraulic circuit must be removed first. Pressure, and then cut off the power supply or power source, after the hydraulic device stops running, it can be disassembled. In addition, you should pay attention to the order when disassembling the cylinder. Remember that the order cannot be reversed. Because there are many types of cylinders and their sizes are not the same, the corresponding disassembly order is also different. The basic order is to first put the cylinder out. After removing the oil cylinder head, remove the piston and piston rod. When disassembling the piston or piston rod, if it is difficult to withdraw the piston or piston rod, do not use force to pull it out. This will damage or even damage the component. The cause should be investigated and then disassembled. In addition, before and after dismantling, to prevent the components of the oil cylinder from being contaminated by dust or impurities, you should try to operate in a clean and clean environment. Or other work cloth. At this time, detailed inspection of these parts is required. The repairs must be replaced if necessary.
Weihai Kate Hydraulic Technology Co., Ltd. Technical Support: Business Opportunity Weihai | Site Map Some of the pictures and content on this site come from the Internet, and the copyright belongs to the original author or the original company. If you think we have infringed your copyright, please let us know and we will delete it