The rotary cylinder is a tightly-assembled accessory that uses hydraulic pressure to collect very high torque in a small space. The rotating oil cylinder may leak oil during use. When you encounter this kind of problem, don't panic. Find out the cause of the problem and then take the right medicine.
1. First check the deflection of the oil cylinder, and it must reach or approach the required value. Generally, the oil cylinder requires the outer circle to jump within 1 wire. Otherwise, the jitter is too large and the oil is sure to leak.
2. Check whether the tubing goes down smoothly at a certain slope and cannot bend.
3. See that the tubing outlet cannot be submerged into the oil level, it must be a little higher. Otherwise, oil will leak if there is back pressure.
In addition, if the rotary cylinder is used for a long time, the components may be aging. If this is the reason, we recommend that you replace the original components according to the size of each component to solve the problem.
Oil seal is a mechanical element used to seal grease. It isolates the parts in the transmission parts that need to be lubricated from the output parts, so that the lubricant does not leak. What kind of oil seal is generally suitable for the rotary oil cylinder?
Generally, oil seals are less capable of withstanding pressure. For the oil seal on the rotating oil cylinder, we recommend using seals for holes. There are many forms, and the materials are rubber and plastic. The specific use depends on the temperature, pressure, rotation, speed and other factors of the cylinder.
Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
Main products: swing cylinder, rotary cylinder