The helical swing oil cylinder converts the linear motion of the piston into the swing motion of the output shaft through the oblique thread meshing form, which is characterized by high efficiency. How to maintain the spiral swing cylinder?
1. Frequently check the connection parts such as the threads and bolts, and tighten them immediately when they are loose.
2. Always lubricate the joints to prevent rust or abnormal wear in an oil-free state.
3. Spiral swing oil cylinder should pay attention to rust prevention, because it will be eroded by oxides and acid gases during use. If it is not protected, rust will occur. Therefore, it is necessary to apply film grease for rust protection.
4. Control the temperature of the system. Excessive oil temperature will reduce the service life of the seals. Long-term high oil temperatures will permanently deform the seals and even cause them to fail completely.
5. The hydraulic oil in the spiral swing cylinder has a useful life. It can not be used indefinitely, and it will also deteriorate. Therefore, it must be replaced regularly. If it is used for a long time, foreign matter will inevitably be mixed and the cylinder will be damaged.
The above points are the daily maintenance of the spiral swing oil cylinder. Any mechanical product has a service life. If we strengthen the maintenance awareness of the oil cylinder in normal times, it will extend the life of the oil cylinder.
Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
Main products: swing cylinder, rotary cylinder