There are eight basic forms of swing oil cylinders according to the different oil cylinders. Let us introduce them in detail below. 1. Spring return single-acting cylinder: usually limited to small short-stroke cylinders for holding and clamping. 2. Standard double-acting: The power stroke is in two directions and is used in most applications. 3. Plunger single-acting cylinder: There is only one fluid chamber. This type of cylinder is usually installed vertically. The load reset causes the cylinder to shrink. They are also called "displacement cylinders" and are practical for long strokes. of; 4. Double rod cylinder: When equal displacement is required on both sides of the piston, or when a load is connected to each end when it is mechanically advantageous, the additional end can be used to install a cam that operates a stroke switch, etc. 5. Multi-stage telescopic cylinder: It can take 4 sets of sleeves, and the length of folding is shorter than the standard cylinder. It has single or double action, and is usually used in occasions where the installation space is small but a large stroke is required. 6. Single-acting cylinder: When thrust is required in only one direction, a single-acting cylinder can be used. 7. Tandem cylinder: A serial cylinder foot consists of two coaxially mounted cylinders. The pistons of the two cylinders are linked by a common piston rod. A rod seal is set before the two cylinders so that each cylinder can double-act. When installation width or height is restricted. Tandem cylinders can increase output. 8. Twin cylinder: A twin cylinder is composed of two coaxially mounted cylinders. The two pistons are not connected. A rod seal is set between the two cylinders so that each cylinder can double-act. The two cylinders can be installed with piston rod to piston or back to back. Usually used to provide three position work. The above are the 8 basic forms of the oil cylinder in the swing oil cylinder. I hope we can help everyone understand more about the swing oil cylinder.
Weihai Kate Hydraulic Technology Co., Ltd. Technical Support: Business Opportunity Weihai | Site Map Some of the pictures and content on this site come from the Internet, and the copyright belongs to the original author or the original company. If you think we have infringed your copyright, please let us know and we will delete it