网上赌场网址多少

Several causes of strain on the swing cylinder

hit count: Updated: 18/09/03 14:17:09 Source: avervenus.com [ close ] share:

    Different degrees of swinging the oil cylinder will cause different degrees of damage to the oil cylinder, which may seriously damage the equipment, so we must find the cause of the oil cylinder's strain to prevent this phenomenon.
    1. If the three aspects of the concentricity, perpendicularity and straightness of the oil cylinder are not coordinated or properly handled during installation, the oil cylinder will also be strained.
    2. If the machine is not well designed, or if an error occurs in the design, the oil cylinder will also be damaged.
    3. The piston rod is subjected to radial force, which causes friction between it and the guide sleeve, which causes the cylinder to be strained.
    4, there is a problem with the quality of the cylinder itself, such as the problem of concentricity.
    5. Due to foreign matter and other factors, the surface of the piston rod is damaged. When it reciprocates, it will damage the cylinder.
    6, the quality of the dust ring is not close, so that dust or foreign matter into the cylinder, which will cause the cylinder strain.
    The above is the cause of the strain of the swing oil cylinder. You can find the corresponding solutions and preventive measures based on these reasons to avoid damage to the oil cylinder.


    Editor: nana

    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder