网上赌场网址多少

Lubrication system of spiral swing cylinder

hit count: Updated: 18/12/26 14:30:12 Source: avervenus.com [ close ] share:

    After any machine is used for a long time, it is necessary to lubricate the parts to prevent damage from friction. Therefore, the lubrication system is very important for the spiral swing oil cylinder, and we will introduce it in detail below.
    1. Dry friction between surfaces not only increases the power consumption of the engine and accelerates the wear of the working surface of the part, but also may burn the working surface of the part due to the heat generated by the friction, causing the engine to fail to run.
    2. The function of the lubrication system is to continuously deliver a sufficient amount of clean engine oil with an appropriate temperature to the friction surfaces of all transmission parts while the engine is operating, and form an oil film between the friction surfaces to achieve liquid friction. So as to reduce frictional resistance, power consumption and wear of machine parts, in order to achieve the purpose of improving engine reliability and durability.
    3. After the engine oil has been working for a period of time, it is mixed with metal wear debris and other mechanical impurities produced by friction of engine parts, as well as the gum produced by the engine oil itself. If these impurities enter the lubricant passage with the engine oil, they will accelerate the wear of the engine. It may also block the oil circuit, so oil filters are installed in the lubrication system of modern engines.
    4. The basic task of the lubricating system is to continuously supply clean, oil with a certain pressure and suitable temperature to the friction surface of the moving parts, so that the engine can work normally. To this end, the pressure lubrication system has an oil pump that establishes sufficient oil pressure for pressure lubrication and oil circulation, a container for storing oil, a circulating oil composed of a lubricating oil pipe and a series of lubricating oil channels processed on the engine body. road. There is also a device in the oil circuit that limits high oil pressure, a pressure limiting valve, which can be attached to the oil pump or can be set separately.
    The above is the introduction of the lubricating system of the spiral swing cylinder. If you want to know more related issues, please continue to pay attention to us.


    Editor: nana

    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder