The rotary cylinder is a tightly-assembled accessory that uses hydraulic pressure to collect very high torque in a small space. And its application is very wide, in order to better use the rotating oil cylinder, it is recommended that you do a good job of maintenance and protection during use.
First, to prevent rust
Because the piston part of the hydraulic cylinder is to extend out of the cylinder in the working state, it will naturally be attacked by oxides and acid gases. This requires us to coat it with an appropriate amount of grease to prevent the piston from being a load bearing component Erosion may cause breaks in work.
2. Unpacking and changing oil
The gas cylinder is sealed with a gasification antirust agent, so the inlet plug must not be removed before assembly. After removing the plug, install it on the body immediately and fill the oil tank with oil. In order to avoid foreign objects entering the hydraulic cylinder and increasing friction, the oil should be changed frequently. The hydraulic oil also has a certain service life. Failure to change the oil for a long time will damage or erode the interior of the hydraulic cylinder.
It is necessary to control the speed properly in the work of the hydraulic rotary cylinder, not to exceed 2m / s. This can prolong the service life of the hydraulic cylinder. The internal installation of a buffer device is useful for the protection of the hydraulic cylinder.
Although the maintenance and protection of the rotating oil cylinder is very good, if you use the oil cylinder incorrectly, various problems will occur, so be sure to use the rotating oil cylinder according to the operating specifications.
Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
Main products: swing cylinder, rotary cylinder