The application of the oil cylinder is very wide. Everyone knows that when the oil cylinder is running, it needs to be exhausted when it encounters crawling conditions. So how do we operate it? Let me explain to you. General cylinders have exhaust ports or exhaust valves:
1. If it is an exhaust port, when you enter the oil at one end, you should observe the vicinity of the oil return pipe at the other end to see if there is a plug. If there is a plug, slowly loosen the plug. At this time, the gas will be released first. After a while, the oil will slowly come out; if there is no wire plug, slowly loosen the connection of the return pipe.
2. If it is an exhaust valve, you can loosen the tubing joint, and then do a few more actions to exhaust. But pay attention to fuel injection. If there is a pressure measuring joint on the cylinder, it is safer to use a pressure measuring joint because it is easy to operate. Generally speaking, the exhaust is good at a high position, so the effect is better.
Of course, if neither of these are available on the cylinder, the exhaust operation can also be performed. The specific operation is: first move the piston rod to one direction, pause for some time, and then move it to the other direction, and then pause for some time. Repeat this process to remove the air from the cylinder.
The above is the explanation of how the cylinder should vent when it encounters crawling conditions. Do you all know? If you have any other questions, you can also call our company and we will try our best to answer your questions.
Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
Main products: swing cylinder, rotary cylinder