Because the rotary oil cylinder must withstand a certain pressure, the heavier the load, the greater its pressure. Therefore, it is very important to maintain the rotary oil cylinder. Here is what we need to pay attention to when maintaining the rotary cylinder.
First prevent rust. Because the piston part of the rotating oil cylinder is extended out of the oil cylinder in the working state, it will naturally be attacked by oxides and acid gases. This requires us to coat it with an appropriate amount of grease to prevent the piston from being a load-bearing component. Erosion may cause breaks in work.
Secondly, change the oil out of the box. Because of long-term use, foreign matter will inevitably enter the rotating oil cylinder, which will increase friction during use. In addition, the oil also has a certain service life. If the oil is not changed for a long time, it will damage or erode the inside of the rotating oil cylinder. It is better to prevent it, so the speed of the hydraulic cylinder should be controlled appropriately, not more than 2m / s. This can extend the service life of the rotary cylinder. In addition, for protection and safety, the internal installation of a buffer device is very effective for the protection of the rotary cylinder. of.
Well, the above are the precautions when maintaining the rotating oil cylinder. Have you learned it? In the daily use of the oil cylinder, you must maintain it well to prolong its life and ensure its own effect.
Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
Main products: swing cylinder, rotary cylinder