网上赌场网址多少

Swing cylinder cleaning precautions

hit count: Updated: 19/10/08 13:39:10 Source: avervenus.com [ close ] share:

    As a swing cylinder manufacturer, in addition to providing users with high-quality engineering cylinder products, it is also necessary to tell them the cleaning work after use. In order to better help everyone, the daily cleaning of swing cylinders needs to be noted as follows:
    1. Parts that have been cleaned but not installed for the time being should be kept in rust-proof oil. Wet areas and seasons should pay special attention to rust-proof.
    2. The cleaning of the hydraulic parts of the swing cylinder should be performed on a dedicated cleaning table. Assuming the constraints of the conditions, the cleanliness of the temporary operation table should also be ensured.
    3. The cleaned parts cannot be scrubbed with cotton, linen, silk and chemical fiber fabrics to avoid falling fiber pollution system. It is also impossible to blow the parts with Pishanjun, and when necessary, the parts can be dried with clean and dry compressed air.
    4. Disassembly, cleaning and cleaning of the hydraulic parts of the swing oil cylinder should be carried out in a clean room that conforms to national standards. If necessary, the operating room should be charged so that the indoor pressure is higher than outdoor and avoid atmospheric dust pollution.
    Do you know the daily cleaning precautions for the above swing cylinder?

    Editor: Hao

    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder