When does the swing cylinder need to be vented
Swing cylinders have a wide range of applications in life, but after a long period of use, there will be some small faults that need to be exhausted. Then, under what circumstances does the swing cylinder need to be exhausted? let's figure it out together.
After the oil cylinder is running, if there is a crawl phenomenon, in this case, exhaust is required. Generally, the oil cylinder has an exhaust port or an exhaust valve. The specific operations are as follows:
When entering the oil at one end, observe the vicinity of the oil return pipe at the other end to see if there is a plug. If there is a plug, slowly release the plug. At this time, the gas will be released first, and then the oil will slowly come out after a while; If there is no wire plug, slowly loosen the connection of the return pipe.
You can loosen the tubing joint, and then do a few more actions to vent. But pay attention to fuel injection. If there is a pressure measuring joint on the cylinder, it is better to choose a pressure measuring joint because it is easy to operate. Generally speaking, the exhaust is good at a high position, so the effect is better.
Of course, if neither of these are available on the cylinder, the exhaust operation can also be performed. The specific operation is: first move the piston rod to one direction, pause for some time, and then move it to the other direction, and then pause for some time. Repeat this process to remove the air from the cylinder.
The above is the related introduction to the exhaust of the swing oil cylinder. I hope it will be helpful to everyone. If you have more knowledge that you want to know, please call the company and we will serve you wholeheartedly.