网上赌场网址多少

The importance of seals in rotating cylinders

hit count: Updated: 19/11/13 10:13:11 Source: avervenus.com [ close ] share:
    With rotating cylinders, we can accomplish different tasks. However, if you want to ensure the normal generation of pressure, the prerequisite is to ensure the tightness. This shows the importance of the seal ring in the rotating oil cylinder.
    If the tightness of the hydraulic rotary cylinder is not good, not only the effect will not be achieved in the process of energy conversion, but also serious waste will be caused.
    In order to prevent the leakage of hydraulic oil, we will install a sealing ring between the cylinder barrel and the piston. In addition, corresponding sealing rings need to be installed between the cylinder barrel and the end covers, between the piston rod and the guide sleeve, and between the piston rod and the cylinder head.
    It is necessary not only to install a guide sleeve between the front end of the hydraulic cylinder and the piston rod, but also to provide a corresponding dust ring. These sealing devices are parts that effectively ensure their tightness. The seal ring is usually a ring cover composed of one or several parts. We can fix it on a bearing ring or washer. This can be tightly combined with other rings or washers to prevent the leakage of lubricant and Invasion of foreign objects.
    When we choose the seal, we should guarantee its quality. Otherwise, it is not only difficult to ensure the tightness, but also the normal performance of our hydraulic cylinders cannot be guaranteed.
    In the daily use of hydraulic cylinders, be sure to check the seal. If wear is found, it should be replaced in time to prevent the operation of the hydraulic cylinder from being blocked due to oil leakage and the effectiveness cannot be exerted.
    The above is the introduction of the importance of the sealing ring in the rotating oil cylinder. I hope it will be helpful to everyone.
    Editor: Y
    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi Mobile: 13156089310
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder