网上赌场网址多少

Bearing lubrication system of spiral swing oil cylinder

hit count: Updated: 19/12/03 14:01:12 Source: avervenus.com [ close ] share:
    The bearing lubrication system is an important part of the spiral swing oil cylinder. Before you use it, you need to know more about it. The following introduces its bearing lubrication system to everyone.
    1. Dry friction between surfaces not only increases the power consumption of the engine and accelerates the wear of the working surface of the part, but also may burn the working surface of the part due to the heat generated by the friction, causing the engine to fail to run.
    2. The function of the lubricating system is to continuously and continuously supply a sufficient amount of clean engine oil with an appropriate temperature to the friction surfaces of all transmission parts, and form an oil film between the friction surfaces to achieve liquid friction. So as to reduce friction resistance, power consumption and wear of the machine parts, in order to achieve the purpose of improving engine reliability and durability.
    3. After the engine oil has been working for a period of time, it is mixed with metal wear debris and other mechanical impurities generated by friction of engine parts, as well as the gum produced by the engine oil itself. If these impurities enter the lubricant passage with the engine oil, they will accelerate engine wear It may also block the oil circuit, so oil filters are installed in the lubrication system of modern engines.
    4. The basic task of the lubrication system is to continuously supply clean, oil with a certain pressure and suitable temperature to the friction surface of the moving parts, so that the engine can work normally. For this reason, the pressure lubrication system has an oil pump that establishes sufficient oil pressure for pressure lubrication and oil circulation, a container for storing oil, a circulating oil composed of a lubricating oil pipe and a series of oil channels processed on the engine body road. There is also a device in the oil circuit that limits high oil pressure-a pressure limiting valve, which can be attached to the oil pump or can be set separately.
    The above is the introduction of the bearing lubrication system in the spiral swing oil cylinder. I hope it will be helpful to everyone. If you have more knowledge, please call the company.
    Editor: Y
    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi Mobile: 13156089310
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder