网上赌场网址多少

Causes of abnormal noise during rotation of the cylinder

hit count: Updated: 19/12/25 11:07:12 Source: avervenus.com [ close ] share:
    The rotary cylinder is a tightly-assembled accessory that uses hydraulic pressure to collect very high torque in a small space. Despite their high power, they can still be accurately and easily controlled. Slewing cylinders have been successfully used in almost all areas that require limited rotational motion and high torque.
    There are often abnormal sounds during the operation of the rotating oil cylinder, and the specific causes of this problem are mainly the following:
    First, there is a blockage inside the oil cylinder, which causes problems such as lack of oil or stuck;
    The second is that the bearings where the cylinder is connected to the motor are worn. The main axis of the oil cylinder push-pull rotation is connected with the oil pipe for the rotating oil sleeve.
    These are the two reasons for the abnormal noise caused by the rotation of the rotary cylinder, so you can find the corresponding solutions based on these two reasons to solve this problem. In addition, the cleaning of the oil cylinder must be done well. If there is any problem, the damaged parts can be repaired after disassembly, or the plating can be performed or the surface can be scraped. Long repairs and high repair costs.
    Editor: ory

    Navigation

    contact us

    Weihai Kate Hydraulic Technology Co., Ltd. Address: Dongjing Road, Huancui District, Weihai City, Shandong Province Contact: Wang Hongyi Mobile: 13156089310
    Phone: 0631-5789884
    Fax: 0631-5789884
    Email: weihaikaite@163.com
    Main products: swing cylinder, rotary cylinder